Idiomas disponibles

Idiomas disponibles

S-22147
4-1 QUART DUST-FREE
VARIATION 2 SHIPPER KIT
COMPONENTS
1 Corrugated Carton
2 Top/Bottom Pad Inserts
1 – 4 Cell Partition Set
4 Sorbent Pouches
4 – 3 mil Poly Bag
4 – 5.5" 40# Cable Tie
2" Wide (2.6 mil) Polypropylene Tape (Uline Model # S-14564*)
*Sold Separately
Figure 1
Figure 2
Figure 3
PAGE 1 OF 6
1-800-295-5510
uline.com
ASSEMBLY INSTRUCTIONS
3"
Pour le français, consulter les pages 5-6.
1. Obtain the appropriate inner packaging in
accordance with specifications listed in the 49 CFR.
2. Fold flaps on bottom of carton so that they meet.
Manufacturer's certification must be visible on the
outside of the carton. (See Figure 1)
3. Seal bottom of carton with three parallel strips of 2"
wide (2.6 mil) polypropylene tape (Uline Model #
S-14564). The tape must overlap 0.5" side to side and
extend 3" over each end of the carton. (See Figure 2)
4. Fold flaps of top/bottom pad insert and place into
bottom of carton so that the flaps are facing down
towards the bottom of the carton. (See Figure 3)
Para Español, vea páginas 3-4.
0321 IS-22147
Tabla de contenido
loading

Resumen de contenidos para Uline S-22147

Tabla de contenido