Charge Before Use; How It Works - Goalzero SHERPA 100PD Guia Del Usuario

CHARGE BEFORE USE

CHARGE ME NOW: Plug in and charge up before first use.
FROM USB: Plug into a USB-C power source using the included USB-C to
USB-C cable and the USB-C Power Delivery (PD) port on the Sherpa. Utilize
our 65W USB-C charger (sold separately) for a two hour recharge.
FROM SOLAR: Pair the Sherpa with a Goal Zero Nomad Solar Panel and
charge up from the sun. Plug into the USB output on the solar panel using
a USB-A to USB-C cable (sold separately). For the best solar charging
experience, we recommend the Goal Zero Nomad 20 Solar Panel or any other
Goal Zero panel with a USB port.

HOW IT WORKS

3