Blumfeldt Ontario Manual De Instrucciones página 18

EN
18
Wrap PTFE tape around
the blanking plug and vent
valve and screw them tight
to the top of the radiator
with a spanner.
• Stick PTFE tape on the threads of the valves and screw the valves into
the bottom of the radiator. Then tighten them with a spanner.
Step 4
Note: Note that the lower
horizontal rail is fitted with
a deflection block.
Tip: Stick the PTFE tape
into the radiator in the
opposite direction to the
direction in which the
valves are screwed in.