Quick Code Reference; Code Search - Total Control URC-2082 Manual De Instrucciones

- If the original remote control from your Video
Recorder / DVD player did not have a POWER key,
press PLAY instead of POWER during step 6.
- To set up your other devices, follow the same
instructions above, only press the appropriate device
key during step 3.
- Remember to press the correct device key before
operating your device. Only one device can be
assigned to a device key.
TV
VCR
DVD
SAT
If your device does not respond to the TOTAL
CONTROL 8 remote after you have tried all the codes
listed for your brand, you may need to search for your
code. This method may also work if your brand is not
listed at all.

Quick Code Reference

Code search

CD
AUD
AUX1
AUX2
6