Specification; Intent Of Use; Tool Specification; Tool Dimensions - Stanley 70501 Traducción De Instrucciones Originales

E N G L I S H

2. SPECIFICATION

2.1 INTENT OF USE

The 70501 Module is principally a piston and cylinder assembly. When coupled hydraulically to a compatible hydraulic
power source and the relevant nose equipment is attached, it is then used to install 1/16" Avlug® speed rivets, in Industrial
Environments.
The placing module may only be used in accordance with the operating instructions for placing Stanley Engineered
Fastening rivets.
DO NOT use under wet conditions or in the presence of flammable liquids or gases.
The safety instructions must be followed at all times.

2.2 TOOL SPECIFICATION

Force: Pull at stated pull pressure
Pressure: Hydraulic pressure
Stroke: Piston Stroke
Cycle Time: Maximum
Weight: Without nose equipment

2.3 TOOL DIMENSIONS

All dimensions are shown in millimetres.
6
SPECIFICATION
O R I G I N A L I N S T R U C T I O N
METRIC IMPERIAL
3.0 kN 674 lbf
140 bar 2030 PSI
30.0 mm 1.18 in
1 second -
kg lb