Tools; Blades - Von Arx Sc 35 Instrucciones De Manejo

SC 35 • Operating Manual

TOOLS

The right tool for your particular application can be best determined by tests. The following
description only gives guide values. Always use the proper tools provided by the manufacturer
to achieve the desired results.

Blades

Basic - 400171 (350x80x1.5 mm / 13.8x3.1x0.06")
• Strip floor coverings
• Lift carpet tiles and foam backed carpets
• Cork tiles and matting
Long - 400218 (350x130x1.5 mm / 13.8x5.1x0.06")
• Strip floor coverings
• Lift carpet tiles and foam backed carpets
• Cork tiles and matting
U-Blade bottom edge - 400214 (370x80x1.5 mm / 14.6x3.1x0.06")
• Remove felt, underlay
• Linoleum and vinyl flooring
• Matting
U-blade top edge - 400216 (370x80x1.5 mm / 14.6x3.1x0.06")
• Remove felt, underlay
• Linoleum and vinyl flooring
• Matting
Wide blade - 400219 (450x80x2.5 mm / 17.7x3.1x0.1")
• Strip floor coverings
• Lift carpet tiles and foam backed carpets
• Cork tiles and matting
Debris blade - 400217 - (200x80x2.5 mm / 7.9x3.1x0.1")
• Hard glued floor coverings
• Debris
Tools
9