Cleaning The Drip Tray; Removing The Fittings; Removing The Shelf; Removing The Storage Container - Bosch 500 Serie Manual Del Usuario

en-us Cleaning and maintenance
NOTICE:
Unsuitable cleaning agents may damage the surfaces of
the appliance.
Do not use hard scouring pads or cleaning sponges.
▶
Do not use strong or abrasive cleaning agents.
▶
Do not use cleaning agents with a high alcohol content.
▶
Do not use stainless-steel cleaning agents on the out-
▶
side of the appliance.
If you clean fittings and accessories in the dishwasher, this
may cause them to become deformed or discolor.
Never clean fittings and accessories in the dishwasher.
▶
Prepare the appliance for cleaning. → Page 19
1.
Clean the inside of the appliance, the outside of the ap-
2.
pliance, the fittings, the accessories and the door seals
with a dish cloth, lukewarm water and a little pH-neutral
detergent.
Dry thoroughly with a soft, dry cloth.
3.
Insert the fittings and install the appliance components.
4.
Connect the appliance to the electricity supply.
5.
→ Page 7
Switch on the appliance. → Page 12
6.
Put the food into the appliance.
7.
15.3 Cleaning the drip tray
Regularly check the drip tray for water spillages and clean
as necessary.
Press down on the top right corner of the drip grate
1.
and remove it ⁠ .
Wipe out the drip tray with a sponge or absorbent cloth.
2.
20
15.4 Removing the fittings
If you want to clean the fittings thoroughly, remove these
from your appliance.

Removing the shelf

Lift the shelf and remove it
▶
Removing the door rack
Lift the door rack and remove it.
▶

Removing the storage container

Pull the storage container out all the way.
1.
⁠ .