Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Step 19
5/32-32x2/5" truss head screws (x2)
1. Make sure that the sideburner assembly is fully seated in the keyhole slot, then retighten the screws you loosened in "Step
17" on page 19.
2. Secure the right shelf cover with two 5/32-32x2/5" truss head screws (B).
Step 20
1. Loosen the two sideburner control screws. Do not remove the screws.
2. Place the sideburner valve into the hole of the right sideburner shelf cover, then slide it down to lock in place.
3. Retighten the two sideburner control screws.
20
PR-KMY0YMPZVX_B0B8QV3MS2_4 burner Gas Grill_Assembly Man_V1_BK1.indb 20
PR-KMY0YMPZVX_B0B8QV3MS2_4 burner Gas Grill_Assembly Man_V1_BK1.indb 20
10/7/2022 12:16:47 PM
10/7/2022 12:16:47 PM
Publicidad
Tabla de contenido
