Craftsman 247.28901 Manual Del Operador
Craftsman 247.28901 Manual Del Operador

Craftsman 247.28901 Manual Del Operador

Ocultar thumbs Ver también para 247.28901:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Operator's Manual
LAWN TRACTOR
17.5 HP, 42" Mower
Electric Start, 7 Speed
Model No. 247.28901
• Espanol, P. 55
This product has a low emission engine which operates differently
from previously built engines. Before you start the engine, read and
understand this Owner's Manual.
IMPORTANT:
Read and follow all Safety
Rules and Instructions before
operating this equipment.
Sears Brands Management Corp., Hoffman Estates, IL 60179 U.S.A.
Visit our website: www.craftsman.com
®
For answers to your questions about
this product, Call:
1-800-659-5917
Craftsman Tractor Help Line
7 am - 7 pm CT, Mon. - Sun.
Form No. 769-05667
(November 12, 2009)

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Craftsman 247.28901

  • Página 1 ® LAWN TRACTOR 17.5 HP, 42” Mower Electric Start, 7 Speed Model No. 247.28901 • Espanol, P. 55 This product has a low emission engine which operates differently from previously built engines. Before you start the engine, read and understand this Owner’s Manual.
  • Página 2: Tabla De Contenido

    Service and Maintenance ..........18 WARRANTY STATEMENT CRAFTSMAN FULL WARRANTY When operated and maintained according to all supplied instructions, if any non-expendable part of this riding equipment fails due to a defect in material or workmanship within two years from the date or purchase, call 1-800-659-5917 to arrange for free in-home repair.
  • Página 3: California Proposition

    SAFETY INSTRUCTIONS WARNiNg DANgeR This machine was built to be operated according to the safe opera- This symbol points out important safety instructions which, if not tion practices in this manual. As with any type of power equipment, followed, could endanger the personal safety and/or property of carelessness or error on the part of the operator can result in serious yourself and others.
  • Página 4 SAFETY INSTRUCTIONS SLope opeRATioN • Slow down before turning. Operate the machine smoothly. Avoid erratic operation and excessive speed. Slopes are a major factor related to loss of control and tip-over • Disengage blade(s), set parking brake, stop engine and wait until accidents which can result in severe injury or death.
  • Página 5 SAFETY INSTRUCTIONS CHiLDReN SeRViCe Tragic accidents can occur if the operator is not alert to the presence Safe Handling of Gasoline of children. Children are often attracted to the machine and the mowing To avoid personal injury or property damage use extreme care in activity.
  • Página 6: Spark Arrestor

    SAFETY INSTRUCTIONS General Service • Do not change the engine governor settings or over-speed the engine. The governor controls the maximum safe operating speed • Never run an engine indoors or in a poorly ventilated area. Engine of the engine. exhaust contains carbon monoxide, an odorless, and deadly gas.
  • Página 7: Safety Symbols

    SAFETY INSTRUCTIONS SAFeTY SYMboLS This page depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbol Description READ THE OPERATOR’S MANUAL(S) Read, understand, and follow all instructions in the manual(s) before attempting to assemble and operate DANGER—...
  • Página 8 SAFETY INSTRUCTIONS...
  • Página 9: Safety Labels

    SAFETY LABELS DO NOT OPERATE UNLESS AN UNDAMAGED D ISCHARGE COVER OR ENTIRE GRASS CATCHER IS IN PLACE . WARNiNg This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine.
  • Página 10: Assembly

    ASSEMBLY IMPORTANT: Your tractor is shipped with motor oil in the engine. Shipping brace Removal However, you MUST check the oil level before operating. Refer to the WARNiNg Service & Maintenance section for instructions on checking the oil Make sure the riding mower’s engine is off, remove the ignition key, level.
  • Página 11: Tire Pressure

    ASSEMBLY Figure 3 Figure 4 Select desired position for the seat, and secure with the adjustment Place the steering wheel cap over the center of the steering wheel and knob removed earlier. push downward until it “clicks” into place. To adjust the position of the seat, loosen the adjustment knob on the Attaching The Seat bottom of the seat.
  • Página 12: Operation

    Clutch-Brake Pedal NOTE: Any reference in this manual to the RIGHT or LEFT side of the tractor is observed from operator’s position. Meets ANSi Safety Standards Craftsman Tractors conform to the safety standard of the American National Standards Institute (ANSI).
  • Página 13 OPERATION SpeeD CoNTRoL LeVeR SHiFT LeVeR The speed control lever, located on the left side of the The shift lever is located on the left tractor’s dash console, allows you to regulate the ground side of the fender and has three speed of the lawn tractor.
  • Página 14: Safety Interlock System

    OPERATION gas and oil Fill-up IMPORTANT: Your tractor is shipped with motor oil in the engine. However, you MUST check the oil level before operating. Be careful not to overfill. For instructions on how to check the engine oil, refer to Checking The Engine Oil in the Service and Maintenance section of this manual.
  • Página 15: Setting The Cutting Height

    OPERATION ReVeRSe CAUTioN MoDe eNgAgiNg THe pARkiNg bRAke WARNiNg To engage the parking brake: Fully depress the clutch-brake pedal and hold it down with your Use extreme caution while operating the tractor in the REVERSE foot. CAUTION MODE. Always look down and behind before and while backing.
  • Página 16: Driving The Tractor

    OPERATION SToppiNg THe eNgiNe Place the shift lever in neutral, Engage the parking brake, WARNiNg Shut engine off and remove the key. Doing so will minimize the If you strike a foreign object, stop the engine, disconnect the spark possibility of having your lawn ‘‘browned’’ by hot exhaust from plug wire(s) and ground against the engine.
  • Página 17 OPERATION HeADLigHTS A mulch kit can be purchased. See the Replacement Parts & Attach- ments section of this manual for more information. • The lamps are ON whenever the tractor’s engine is running. USiNg THe DeCk LiFT LeVeR • The lamps turn OFF when the ignition key is moved to the STOP position.
  • Página 18: Service And Maintenance

    SERVICE AND MAINTENANCE MAiNTeNANCe SCHeDULe WARNiNg Before performing any type of maintenance/service, disengage all Follow the maintenance schedule given below. This chart describes controls and stop the engine. Wait until all moving parts have come to service guidelines only. Use the Service Log column to keep track of a complete stop.
  • Página 19: Engine Maintenance

    SERVICE AND MAINTENANCE eNgiNe MAiNTeNANCe Changing engine oil The engine oil should be changed in the first 5 hours and then every Checking the engine oil 50 hours or once a season. To change the engine oil, proceed as Only use high quality detergent oil rated with API service classification follows: SF, SG, SH, or SJ.
  • Página 20: Fuel Filter

    SERVICE AND MAINTENANCE Fuel Filter Air Cleaner WARNiNg WARNiNg If filters, or covers are not installed correctly serious injury or death Gasoline and its vapors are extremely flammable and explosive. Fire could result from backfire. Do not attempt to start the engine with or explosion can cause severe burns or death.
  • Página 21 SERVICE AND MAINTENANCE Spark plug pivot points & Linkage Clean area around the spark plug base. Do not sandblast spark Lubricate all the pivot points on the drive system, parking brake and lift plug. Spark plug should be cleaned by scraping or wire brushing linkage at least once a season with light oil.
  • Página 22 SERVICE AND MAINTENANCE CLeANiNg THe eNgiNe AND DeCk Measure the distance from the front of the blade tip to the ground and the rear of the blade tip to the ground. The first measure- Any fuel or oil spilled on the machine should be wiped off promptly. Do ment taken should be between ¼”...
  • Página 23: Seat Adjustment

    SERVICE AND MAINTENANCE Hex Cap Screw Figure 13 Figure 14 Seat Adjustment Looking at the cutting deck from the left side of the tractor, locate the bow-tie pin that secures the deck support rod on the rear Refer to the Assembly section of this manual for seat adjustment left side of the deck.
  • Página 24: Jump Starting

    SERVICE AND MAINTENANCE The recommended operating tire pressure is: Remove the bow-tie cotter pin securing the deck stabilizer rod to the deck. Slide the deck lift rod from the mounting bracket on the • Approximately 10 psi for the rear tires deck as seen in Fig.
  • Página 25: Cutting Blades

    SERVICE AND MAINTENANCE If your tractor has not been put into use for an extended period of time, Remove the hex flange nut that secures the blade to the spindle charge the battery as follows: assembly. See Fig. 18. Set your battery charger to deliver a max of 10 amperes. To properly sharpen the cutting blades, remove equal amounts of metal from both ends of the blades along the cutting edges, If your battery charger is automatic, charge the battery until the...
  • Página 26: Parking Brake Adjustment

    SERVICE AND MAINTENANCE IMPORTANT: The V-belt found on your tractor is specially designed While holding the belt and pulley together, rotate the pulley to the to engage and disengage safely. A substitute (non-OEM) V-belt can left. Continue holding and rotating the pulley and belt until the belt be dangerous by not disengaging completely.
  • Página 27: Preparing The Engine

    MAINTENANCE WARNiNg Never store lawn tractor with fuel in tank indoors or in poorly ventilated areas where fuel fumes may reach an open flame, spark, or pilot light as on a furnace, water heater, clothes dryer, or gas appliance. pRepARiNg THe eNgiNe WARNiNg Gasoline is a toxic substance.
  • Página 28: Need More Help

    MAINTENANCE problem Cause Remedy Engine fails to start PTO/Blade Engage knob engaged. Place knob in disengaged (OFF) position. Parking brake not engaged. Engage parking brake. Spark plug wire(s) disconnected. Connect wire(s) to spark plug(s). Throttle control lever not in correct starting Place throttle lever to FAST position.
  • Página 29 Notes...
  • Página 30: Parts List

    PARTS LIST Craftsman Lawn Tractor Model 247.28901...
  • Página 31 PARTS LIST Craftsman Lawn Tractor Model 247.28901 Ref. Ref. Part No. Description Part No. Description 750-04465 Flange Spacer 710-04484 Screw, 5/16-18 x .750 783-04862 Speed latch 710-04593 Screw, 5/16-18 x .375 710-0604A Self-Tap Screw, 5/16-18 710-0751 Hex Screw, 1/4-20 x .620...
  • Página 32 PARTS LIST Craftsman Lawn Tractor Model 247.28901...
  • Página 33 PARTS LIST Craftsman Lawn Tractor Model 247.28901 Ref. Ref. Part No. Description Part No. Description 756-04196A Engagement Pulley 683-04155A-0637 Shaft, Lift 747-04857 Belt Keeper Rod Assembly 712-04065 Nut, Hex Flange Insert Lock, 3/8-16 710-04484 Screw, Hd. Tapp, 5/16-18 x .75...
  • Página 34 PARTS LIST Craftsman Lawn Tractor Model 247.28901...
  • Página 35 PARTS LIST Craftsman Lawn Tractor Model 247.28901 Ref. Ref. Part No. Description Part No. Description 938-04007A-0637 Axle Assmbly LH 617-04024 Gear Assembly, Steering 638-04008P Axle Assmbly RH 710-0376 Screw, 5/16-18, 1.00, Gr5 683-0128B-0637 Pivot Bar Axle Assembly 710-0643 Screw, 5/16-18, 1.00, Gr5, Lock 710-04484 Screw, 5/16-18, 0.750...
  • Página 36 PARTS LIST Craftsman Lawn Tractor Model 247.28901...
  • Página 37 PARTS LIST Craftsman Lawn Tractor Model 247.28901 Ref. Part No. Description 710-04483 Screw, 1/4-20 x .500 710-04484 Screw, 5/16-18 x .750 710-0599 Screw Pan Torx Head, 1/4-20 x .500 731-04591A Cup Holder 736-0607 Lock Washer, 5/16 783-04587C-4043 Fender 783-04843-0637 Lift Adjuster Bracket...
  • Página 38 PARTS LIST Craftsman Lawn Tractor Model 247.28901...
  • Página 39 PARTS LIST Craftsman Lawn Tractor Model 247.28901 Ref. Ref. Part No. Description Part No. Description 747-05188 Brake Rod 918-04566 Transmission Drive Assembly 647-04034C-0637 Pedal Assembly 747-05243 Shift Rod, 46” 948-0334 Spacer, T-Axle 647-04035 Shaft Lever Assembly 750-0566A Spacer, .260 x .375 x 1.030 LG 710-0227 Screw, 8-18:0.500...
  • Página 40 PARTS LIST Craftsman Lawn Tractor Model 247.28901...
  • Página 41 PARTS LIST Craftsman Lawn Tractor Model 247.28901 Ref. Ref. Part No. Description Part No. Description 736-0262 Flat Washer, .385 x .870 x .092 918-04822A Spindle Pulley Assembly 736-0362 Flat Washer, .330 x 1.25 x .06 683-0254B-0637 Deck Hanger Bracket Assembly 738-04146 Bolt Plug, M16 x 1.5...
  • Página 42 Notes Page This page intentionally left blank. Use this page to make any notes regarding your tractor.
  • Página 43: Manufacturer's Warranty Coverage

    FeDeRAL and/or CALiFoRNiA eMiSSioN CoNTRoL WARRANTY STATeMeNT YoUR WARRANTY RigHTS AND obLigATioNS MTD Consumer Group Inc, the United States Environmental Protection Agency (EPA), and, for those products certified for sale in the state of California, the California Air Resources Board (CARB) are pleased to explain the emission (evaporative and/or exhaust) control system (ECS) warranty on your outdoor 2006 and later small off-road spark-ignited engine and equipment (outdoor equipment engine) In California, new outdoor equipment engines must be designed, built and equipped to meet the State’s stringent anti-smog standards (in other states, 1997 and later model year equipment must be designed, built, and equipped to meet the U.S.
  • Página 44: Warranted Parts

    WARRANTeD pARTS: The repair or replacement of any warranted part otherwise eligible for warranty coverage may be excluded from such warranty coverage if MTD Consumer Group Inc demonstrates that the outdoor equipment engine has been abused, neglected, or improperly maintained, and that such abuse, neglect, or improper mainte- nance was the direct cause of the need for repair or replacement of the part.
  • Página 45 Look For Relevant emissions Durability period and Air index information on Your engine emissions Label Engines that are certified to meet the California Air Resources Board (CARB) Tier 2 Emission Standards must display information regarding the Emissions Durability Period and the Air Index. Sears, Roebuck and Co., U.S.A. makes this information available to the consumer on our emission labels.
  • Página 46: Repair Protection Agreement

    REPAIR PROTECTION AGREEMENT Congratulations on making a smart purchase. Your new Craftsman® Once you purchase the Agreement, a simple phone call is all that it product is designed and manufactured for years of dependable opera- takes for you to schedule service. You can call anytime day or night, or tion.
  • Página 47: Standard Replacement Parts & Attachments

    Service &Maintenance ....Pages 18-29 WARRANTY STATEMENT Craftsman Full Warranty When operated and maintained according to all supplied instructions, if any non-expendable part of this riding equipment fails due to a defect in material or workmanship within two years from the date or purchase, call 1-800-659-5917 to arrange for free in-home repair.
  • Página 48: Funcionamiento General

    INSTRUCCIONES DE SEGURIDAD ADVeRTeNCiA peLigRo Esta máquina fue construida para ser operada de acuerdo con La presencia de este símbolo indica que se trata de instrucciones las reglas de seguridad contenidas en este manual. Al igual que importantes de seguridad que se deben respetar para evitar con cualquier tipo de equipo motorizado, un descuido o error por poner en peligro su seguridad personal y/o material y la de otras parte del operador puede producir lesiones graves.
  • Página 49: Instrucciones De Seguridad

    INSTRUCCIONES DE SEGURIDAD • Nunca deje la máquina en funcionamiento sin vigilancia. Apague • Vaya a baja velocidad. Elija una velocidad lo suficientemente baja, siempre las cuchillas, coloque el freno de mano, detenga el motor y de modo que no tenga que detenerse o hacer cambios mientras retire la llave antes de bajarse del vehículo.
  • Página 50 INSTRUCCIONES DE SEGURIDAD • Para evitar accidentes al operar en marcha atrás, siempre desengan- • Apague todos los cigarrillos, cigarros, pipas y otras fuentes de che las cuchillas antes de colocar marcha atrás. Si está instalado, combustión. el “Modo Precaución Marcha Atrás” (hojas de operar la máquina, •...
  • Página 51 INSTRUCCIONES DE SEGURIDAD No MoDiFiqUe eL MoToR • Revise los pernos de montaje de la(s) cuchilla(s) y del motor a intervalos frecuentes para verificar que estén bien apretados. Para evitar lesiones graves o la muerte, no modifique el motor bajo Además, inspeccione visualmente la(s) cuchilla(s) en busca de ninguna circunstancia.
  • Página 52: Símbolos De Seguridad

    INSTRUCCIONES DE SEGURIDAD SíMboLoS De SegURiDAD Esta página representa y describe la seguridad los símbolos que pueden parecer en este producto. Lea, comprenda, y siga todas instrucciones en la máquina antes procurar para reunir y operar. Symbol Description LEA EL MANUAL(S) DEL OPERADOR leído, entienda, y siga todas las instrucciones en el manual(s) antes de procurar montar y funcionar PELIGRO—...
  • Página 53 INSTRUCCIONES DE SEGURIDAD...
  • Página 54: Etiquetas De Seguridad

    ETIQUETAS DE SEGURIDAD DO NOT OPERATE UNLESS AN UNDAMAGED D ISCHARGE COVER OR ENTIRE GRASS CATCHER IS IN PLACE . ADVeRTeNCiA Este símbolo señala a cabo las instrucciones de segu- ridad importantes que, si no se siguen, podría poner en peligro la seguridad personal y / o la propiedad de sí...
  • Página 55: Importante

    ASAMBLEA IMPORTANTE: Su tractor se entrega con aceite de motor en el operar el tractor. motor. Sin embargo, debe comprobar el nivel de aceite antes de eNVío bRACe eLiMiNACióN operar. Consulte la sección de Servicio y Mantenimiento para obtener ADVeRTeNCiA instrucciones sobre la comprobación del nivel de aceite.
  • Página 56: Colocación De La Sede

    ASAMBLEA qUe UNe eL VoLANTe Si el volante de su tractor no llegó adjunta, el hardware de la colocación se ha embalado en el volante, por debajo de la tapa del volante. Con cuidado la tapa de la palanca del volante y quitar el hardware.
  • Página 57: Operación

    Toma de fuerza de palanca (Blade Engage) Portavasos Cumple con los estándares de seguridad de ANSi De Velocidad Las máquinas quitanieve de Craftsman cumplen con los estándares de seguridad del Palanca de ajuste del asiento instituto estadounidense de estándares nacionales (ANSI). Pedal de freno...
  • Página 58: Portavasos

    OPERACIÓN De VeLoCiDAD Para detener el motor, girar la llave de encendido en sentido contrario a la posición STOP. La palanca de control de velocidad, ubicado en el lado izquierdo del tablero del tractor de la consola, le permite IMPORTANTE: antes de operar el tractor, se refieren tanto a regular la velocidad baja del tractor del césped.
  • Página 59: Carga De Aceite Y Gasolina

    OPERACIÓN CARgA De ACeiTe Y gASoLiNA combustible de trinquete, STOP llenar el tanque de combustible una vez que se ve el interior de la boca de llenado. Esto asegura que un Aceite buen volumen de expansión se crea lo contrario, el desbordamiento de combustible puede crear una situación peligrosa.
  • Página 60: Sistema De Bloqueo De Seguridad

    OPERACIÓN SiSTeMA De bLoqUeo De SegURiDAD Presione el botón PUSH INVERSOR (Orange, botón triangular) en la esquina superior derecha de la tecla de módulo de El sistema de bloqueo de seguridad está diseñado para la operación conmutación. La luz indicadora de color rojo en la parte superior segura del tractor.
  • Página 61: Arranque Del Motor

    OPERACIÓN ARRANqUe DeL MoToR LA CoNDUCCióN DeL TRACToR ADVeRTeNCiA ADVeRTeNCiA No haga funcionar el tractor, si el sistema de bloqueo no funciona Evite comienza pronto, el exceso de velocidad y paradas bruscas. correctamente. Este sistema fue diseñado para su seguridad y ADVeRTeNCiA protección.
  • Página 62: Conducción En Las Laderas

    OPERACIÓN iNVoLUCRAR A LoS bLADeS La palanca de cambios en punto muerto. Reinicie el motor. Participación de la toma de fuerza (Blade Engage) las transferencias de Coloque la palanca de control de velocidad en la posición más energía a la plataforma de corte o de otro tipo (disponible por separado) alta velocidad.
  • Página 63 OPERACIÓN CoRTAR FARoS ADVeRTeNCiA • Las lámparas están ON cuando el motor del tractor se está ejecutando. Para ayudar a evitar el contacto con la cuchilla o una lesión en • Las luces se apaga cuando la llave de contacto se mueve a la el objeto lanzado, Mantenga a los espectadores, los ayudantes, posición STOP.
  • Página 64: Service And Maintenance

    SERVICE AND MAINTENANCE MAiNTeNANCe SCHeDULe WARNiNg Before performing any type of maintenance/service, disengage all Follow the maintenance schedule given below. This chart describes controls and stop the engine. Wait until all moving parts have come to service guidelines only. Use the Service Log column to keep track of a complete stop.
  • Página 65: Mantenimiento Del Motor

    SERVICE AND MAINTENANCE MANTeNiMieNTo DeL MoToR pReCAUCióN Comprobar el aceite del motor No llene demasiado. Llenado excesivo de aceite puede provocar que Sólo el uso de aceite de alta detergente se evaluó la calidad con la el motor no empezar, difícil de partida, o fumar motor. Si más de la clasificación de servicio API marca FULL en la varilla, el aceite de drenaje para reducir el nivel de aceite en FULL marca en la varilla de medición.
  • Página 66: Limpiador De Aire

    SERVICE AND MAINTENANCE Use pinzas para apretar pestañas en las pinzas, a continuación, deslice fuera de las pinzas el filtro de combustible. Twist y tirar de las líneas de combustible fuera del filtro de combustible. Ver Figura 9. Clamp Fuel Line Figure 10 bujía...
  • Página 67: Lubricación

    SERVICE AND MAINTENANCE Limpieza del motor Limpieza de la batería pReCAUCióN Limpieza de la batería al sacarlo del tractor y el lavado con una solu- ción de bicarbonato y agua. Si fuera necesario, raspe las terminales No utilice agua para limpiar las piezas del motor. El agua puede de la batería con un cepillo de alambre para quitar los depósitos.
  • Página 68: Delante A Atrás

    SERVICE AND MAINTENANCE AjUSTeS Un lado a otro Si la plataforma de corte parece ser la siega de forma desigual, un ADVeRTeNCiA lado a lado de ajuste puede ser realizado. Ajuste si es necesario lo Nunca trate de hacer los ajustes mientras el motor esté en marcha, siguiente: excepto si se especifica en el manual del operador.
  • Página 69 SERVICE AND MAINTENANCE Seat Adjustment NOTE: The bow-tie hair-pin clips should be installed from the top down. Refer to the Set-Up and Assembly section of this manual for seat Looking at the cutting deck from the left side of the tractor, locate adjustment instructions.
  • Página 70 SERVICE AND MAINTENANCE Carefully remove the PTO cable from the rear of the cutting deck Connect positive (+) cable to positive post (+) of your tractor’s by removing the hair pin clip which secures it. Remove the spring discharged battery. from the deck idler bracket.
  • Página 71 SERVICE AND MAINTENANCE WARNiNg CAUTioN Periodically inspect the blade and/or spindle for cracks or damage, If the cutting edge of the blade has previously been sharpened, or if especially after you’ve struck a foreign object. Do not operate the any metal separation is present, replace the blades with new ones. machine until damaged components are replaced.
  • Página 72 SERVICE AND MAINTENANCE CHANgiNg THe TRANSMiSSioN DRiVe beLT NOTE: Several components must be removed and special tools (i.e. air/impact wrench) in order to change the tractor’s drive belt. Contact Hex Washer Screws the nearest Sears Service Center to have your transmission drive belt serviced.
  • Página 73 TROUBLESHOOTING problem Cause Remedy Engine fails to start PTO/Blade Engage knob engaged. Place knob in disengaged (OFF) position. Parking brake not engaged. Engage parking brake. Spark plug wire(s) disconnected. Connect wire(s) to spark plug(s). Throttle control lever not in correct starting Place throttle lever to FAST position.
  • Página 74 Notas...
  • Página 75: Responsabilidades Del Propietario Según La Garantía

    MTD CoNSUMeR gRoUp, iNC. (MTD), el bordo de Recursos de Aire de California (CARb) y la Agencia de protección Medioambiental de estados Unidos (U. S. epA) Declaración de garantía del Sistema de Control de emisiones (Derechos y obligaciones del propietario según la garantía contra defectos) LA COBERTURA DE SISTEMA DE CONTROL DE EMISIÓN ES APLICABLE A MOTORES CERTIFICADOS COMPRADOS EN CALIFORNIA EN 2005 Y A PARTIR DE ENTONCES, QUE SON USADOS EN CALIFORNIA, Y HASTA AÑO 2005 DE MODELO CERTIFICADO Y MOTORES POSTERIORES QUE SON COMPRADOS Y USADOS EN OTRA PARTE EN LOS ESTADOS UNIDOS.
  • Página 76 reemplazada según la garantía se garantizará por el resto del período de garantía. Cualquier pieza garantizada que esté programada para reemplazo según el mantenimiento requerido de conformidad con las instruc- ciones escritas de la Subsección (c) se garantiza por el período de tiempo anterior a la primera fecha de reemplazo programada para esa pieza.
  • Página 77 busque el período de duración de emisiones importantes yla información de clasificación de aire en la etiqueta de emisiones de su motor Los motores cuyo cumplimiento con los estándares de emisión Tier 2 de la Comisión de Recursos Ambientales de California (CARB) esté...
  • Página 78: Acuerdo De Protección Para Reparaciones

    Felicitaciones por haber realizado una adquisición inteligente. El Una vez adquirido el Acuerdo, puede programar el servicio con producto Craftsman® que ha adquirido está diseñado y fabricado tan sólo realizar una llamada telefónica. Puede llamar en cualquier para brindar muchos años de funcionamiento confiable. Pero como momento del día o de la noche o programar un servicio en línea.
  • Página 79 Get it fixed, at your home or ours! Your Home For troubleshooting, product manuals and home solutions advice: www.managemyhome.com For repair – in your home – of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner’s manuals that you need to do-it-yourself.

Tabla de contenido