Perfomance Tool W85007 Instrucciones De Armado

D-FRAME CREEPER SEAT
Item Number W85007
ASSEMBLY INSTRUCTIONS
1. Connect the two Support Frames (2) to the Tray (11) and Base Frame (8) assembly using
the four larger Bolts (10), Washers (6) and Nuts (5).
2. Place Reinforcement Bars (12) across Support Frames, aligning holes.
3. Attach the Seat Cushion (1) to the aligned Support Frames and Reinforcement Bars using
the four Screws (4) and Washers (3) provided.
4. Tighten all hardware before using.
5. Insert Wheel (9) into holes of Base Frame (8)
and insert Cap Screw (7) into holes on
Frame and Tray. Fasten nut.
6. Repeat step 5 on all four wheels.
Part # Deascription
1 Seat Pad
2 Side Frame
3 Washer 6
4 Bolt M6-40
5 Nut M8
6 Washer 8
7 Cap Screw M8
8 Bottom Frame
9 Wheels
10 Bolt M8-60
11 Tool Tray
12 Seat Support Strut 2
Please read these instructions carefully and retain them for future use.
5
6
Qty.
1
7
2
4
4
4
4
4
1
8
4
4
1
9
© Copyright 2017 WILMAR CORPORATION,
P.O. Box 88259 Tukwila, WA 98138
1
12
3
4
10
2
11