MYERS MTS53256 El Manual Del Propietario

OWNER'S MANUAL
CONTENTS:
Page 1 Specifications
2 Warning Information
3-4 Operating Instructions
5-6 Parts Diagram and List
SPECIFICATIONS
Impact Type . . . . . . . . . . . . . . . Twin Hammer
Anvil Size . . . . . . . . . . . . . . . . . . . . . . . . . 1"
Free Speed . . . . . . . . . . . . . . . . . . 5,500 RPM
Max. Torque . . . . . . . . 2,200 ft-lb (2,970 Nm)
Breakaway Torque . . . . 3,200 ft-lb (4,339 Nm)
Product Weight . . . . . . . . . . 15.8 lbs (7.2 kg)
Product Length . . . . . . . . . .22.83" (580 mm)
Air Consumption . . . . . . 7.5 CFM (212 l/min)
Air Inlet Pressure . . . . . . . . . . 6.3 bar (90 psi)
Air Inlet Size . . . . . . . . . . . . . . . . . . . . . 1/2"
Air Hose I.D. . . . . . . . . . . . . . . . . . . . . . 1/2"
Exhaust Type. . . . . . . . . . . . . . . . Side Exhaust
ALWAYS READ INSTRUCTIONS
BEFORE USING POWER TOOLS
ALWAYS WEAR SAFETY GOGGLES
ALWAYS WEAR HEARING
PROTECTION
AVOID PROLONGED EXPOSURE
TO VIBRATION
MTS53256
Some dust created by power sanding, sawing, grinding, drilling, and other construction
activities contains chemicals known to cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment,
such as those dust masks that are specially designed to filter out microscopic particles.
1
1" DRIVE LIGHTWEIGHT IMPACT
WRENCH WITH EXTENDED ANVIL
© Copyright 2021, Myers Tire Supply ®
MTS53256
Rev. 7/30/21