Functions; Auto Power Off (Sleep Mode); Change Thermocouple Type - Wavetek Meterman TMD90 Manual De Uso

Read all Safety Information before using this
thermometer.

Functions

Auto Power Off (Sleep Mode)

The TMD90 shuts off automatically approximately 20 minutes after
being turned on. For recording or operating over longer periods of time
you can disable the sleep mode by pressing
simultaneously while power on. When "n" then appear in the center of
the screen you can release the On. Auto power off is disabled when you
turn off the meter.
E

Change Thermocouple Type

Press and
appears. Press the
(the default), J, T, R, S, and E types. The current mode is displayed on
the left side of the LCD. press
the screen.
W
D
C
E
simultaneously for 2 or more seconds until K
button the type of probe cycles through K
Caution
D
, an "S" will appear in the center of
5
A
and