rock space RSD0608 Guía De Instalación Rápida

AC1200 Dual Band WiFi Repeater
Model: RSD0608
Button
Use the end of a paper clip or a similar object to press and
hold this button for about 8 seconds with power on, and
RST
then release it to restore the extender to factory settings.
Method 1: Extending Your WiFi Network Using Web UI
1 Power on the Repeater
Plug the repeater into a power outlet
near the router in the same room.
Wait until the PWR LED turns solid blue.
3
Relocate the Repeater
1.
For better performance, plug the repeater into an
outlet halfway between the router and the WiFi
dead zone.
The location you choose must be within the range
of your existing WiFi network.
2.
Wait until the Signal LED turns blue. If not, relocate
the repeater closer to the router.
3.
Connect your WiFi devices to the repeater using the
SSIDs set by yourself, or your router's SSID with a
su x _EXT/5GEXT, and using the WiFi password
same as your WiFi router.
English
Description
2 Extend Your WiFi Network
1
. Connect your WiFi device to the repeater's
WiFi network rockspace_EXT.
WLAN
rockspace_EXT
Ensure that the Mobile Data (if any)
is disabled.
2
. Start a web browser, enter
http://re.rockspace.local or
192.168.0.254 in the address bar to log in.
Create a login password for later attempts
PWR (recommend).
http://re.rockspace.local
Password (5-32 characters)
Con rm
Next
LED Descriptions
Solid on
Power LED
Blinking
O
On
WPS LED
Blinking
O
Solid blue
Signal LED
Solid red
O
Not Now
WiFi router
The repeater has started.
The repeater is starting.
The repeater is not powered on.
A WPS connection has been established.
A WPS connection is being established.
The WPS function is disabled.
The repeater has connected to your existing WiFi
router/modem, and its position is proper.
The repeater is too far away from the router.
Relocate the repeater closer to the router.
The repeater does not connect to your WiFi router.
3
. Select a WiFi network (SSID) you want to
extend.
Select a WiFi network you want to
extend...
My_home_wi
Rescan Switch Mode
4
. Enter the password of the WiFi network
you want to extend.
Your existing WiFi network
Enter the password of "My_home_wi "
The extended WiFi network
SSID
My_home_wi _5GEXT
Password of the extended network is
same as your existing WiFi network.
Back Extend
Wait a moment, the Extended successfully!
page appears.
Antennas upward and vertical to the ground
RSD0608
Signal
Blue: Successful connection
Red: Failed connection