Ring Automotive RAC630 Instrucciones De Funcionamiento

Ring Automotive RAC630 Instrucciones De Funcionamiento

Compressor automatico de aire
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17

Enlaces rápidos

Automatic digital air compressor with LED light
Caution
Before operating this compressor, please read these instructions and retain for future reference.
Read Carefully
Improper use of the compressor can cause damage to property and possibly harm the user.
When using the compressor ensure the vehicle is parked in a safe location, off the road with the
vehicle handbrake on and where your personal safety is not at risk.
Power Supply
Power required 12 volts DC rated at 10 amps.
o
Fuse Replacement
The fuse is located in the 12v DC plug. Unscrew the end of the DC plug & extract the
o
10amp fuse taking care to note the order of components. Check the fuse and replace if
necessary with an equivalent 10amp fuse.
Cleaning
Only clean the compressor using a clean dry cloth.
o
Do not use cleaning products.
o
Ensure the compressor is clear of any dust or other debris before connection.
o
Caution
Inspect before each use.
o
Do not use the compressor when the vehicle is moving.
o
Do not leave connected to 12v DC socket unattended.
o
Do not put the compressor on or near sources of direct heat or expose to direct sunlight
o
Do not operate the compressor in or around flammable environments.
o
Do not kink or block the air hose while the compressor is working.
o
Do not use the compressor if bent, broken, melted, burnt, wet or any of the components
o
are damaged.
Do not use the air compressor on high pressure tyres such as those used on commercial
o
vehicles, agricultural or specialist vehicles.
Only use the adapters supplied with the device.
o
The compressor is not waterproof.
o
Ensure cables and hoses connected to the compressor do not interfere in the safe
o
operation of the vehicle.
When not in use store in a cool, dry dust free environment in the nylon bag provided.
o
This compressor is not designed for continuous use. Operation over an extended period
o
of time will overheat the unit and damage the compressor. It should not be used
continuously for more than 30 minutes. After 30 minutes, turn it off and let it cool for 15
minutes before resuming operation.
If the compressor is making an abnormal sound, or the temperature of the unit is too
o
high, turn the power off immediately and let it cool for at least 30 minutes before
resuming operation.
The compressor contains no user serviceable parts – Do not open.
o
Tyre Checks
Check tyres on a monthly basis.
o
Incorrect inflation shortens the life and performance of your tyres, increasing fuel
o
consumption and jeopardising safety.
RAC630
Tabla de contenido
loading

Resumen de contenidos para Ring Automotive RAC630

  • Página 17: Lea Atentamente

    Instrucciones de funcionamiento para Compresor automático digital de aire RAC630 ¡Cuidado! Antes de operar, por favor lea y retenga estas instrucciones. Lea atentamente El uso incorrecto puede causar posibles daños a la propiedad. Asegúrese de que el vehículo se encuentra estacionado en un lugar seguro, fuera de la carretera y con el freno de mano puesto.
  • Página 18 Diseño de control 1) Botón ON/OFF (ENCENDIDO/APAGADO) 2) + empuje y sostenga el botón para aumentar la presión ajustada 3) M Pulsar para seleccionar la medición de presión. PSI, KPA or BAR 4) - empuje y sostenga el botón para disminuir la presión predefinida 5) Posición del interruptor de luz: A –...
  • Página 19 que el compresor se infla automáticamente. Si la presión es diferente, vuelva a establecer el compresor con el botones + y -. Si es necesario, el botón ON / OFF puede ser usado para reemplazar el valor predeterminado de presión. Quite el conector de la válvula del neumático y sustituir las tapas de polvo.
  • Página 20: Tabla De Especificación

    Longitud de la manguera de aire 650mm Temperatura de funcionamiento -20˚C to +60˚C aprobado Distribuido por Ring Automotive Ltd, Gelderd Road, Leeds,Inglaterra, LS12 6NA Tarjeta de conmutación+44 (0)113 213 2000 Línea de ayuda técnica +44 (0)113 213 7339 +44 (0)113 231 0266 www.ringautomotive.co.uk autosales@ringautomotive.co.uk...

Tabla de contenido