Transporting/Storage - Saurium Mq168B Manual De Instrucciones

To adjust, loosen the four engine mounting bolts and the engine stay
tightening bolt and move the engine forward or reverse to get proper
tension of the belt.
NOTE: After adjusting the tension, make sure that the outside face of
the drive pulley is flush by using a straight gauge.
(1) ENGINE MOUNTING BOLTS
(2) ENGINE STAY TIGHTENING BOLE
Loosen the attaching bolts of belt stopper.
Adjust the clearance between the belt stopper and the belt as
illustrated with the clutch lever squeezed.
(1) BELT STOPPERS
TRANSPORTING /STORAGE
WARNING When transporting the tiller, turn the fuel valve OFF and
keep the tiller level to prevent fuel spillage. Fuel vapor or spilled fuel
may be ignited.
Before storing the unit for an extended period:
1. Be sure the storage area is free of excessive humidity and dust.
2. Drain the fuel.
31