1. Manuales
  2. Marcas
  3. V-TAC Manuales
  4. Equipo de Iluminación
  5. VT-533ST
  6. Manual de instrucciones

V-TAC VT-533ST Manual De Instrucciones

Ocultar thumbs
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11

Enlaces rápidos

Descargar este manual
INSTALLATION INSTRUCTION
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these
instructions carefully before starting the installation and keep this manual handy for future reference. If you
have any another query, please contact our dealer or local vendor from whom you have purchased the
product. They are trained and ready to serve you at the best.
The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused
by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any
surface due to incorrect removal and installation of the product. This product is warranted for manufacturing
defects only. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day
would void the warranty. This product is warranted for manufacturing defects only.
Our products are designed to comply with the recommendations of BS EN 60598-1:2008 code of practice for
emergency lighting and should be installed by a competent person in accordance with the relevant
regulations. Before installation of any type of emergency lighting always seek the advice of the local fire
prevention officer (or equivalent authority).
LUMINAIRE INFORMATION
● Rated voltage: 220-240V AC 50/60Hz
● Lamp type: 16 x SMD LEDs
● Product size: 346 x 107 x 60 mm (LXWXH)
● Battery type: Ni-Cd 3.6V 1200mAh
● Recharge time: 24 Hours
(Initial Charge: 36 Hours)
● Emergency operation time: 3 Hours
● Rated power: 3 Watt
● Lumen: 140 lm(DC) / 60 lm (AC)
OPERATION DIAGRAM
For Maintained Operation - Maintained operation, link L (Switched Live) to terminal Ls (permanent Live).
If 'Ls' is not connected, the fitting works as non-maintained.
All self-contained emergency lighting luminaires require a continuous (un-swtiched) 220V-240V single
phase 50hz (L) supply to keep the inbuilt batteries charged.
Please note: the LEDs contained in this fitting are not designed to be replaced.
EMERGENCY LIGHTS (VT-533ST)
MAINTAINED
Ls N
L
WEEE Number: 80133970
NON-MAINTAINED
Ls N
L
ENGLISH
Tabla de contenido
loading

Manuales relacionados para V-TAC VT-533ST

Resumen de contenidos para V-TAC VT-533ST

  • Página 11: Introducción Y Garantía

    EMERGENCY LIGHTS (VT-533ST) INTRODUCCIÓN Y GARANTÍA Le agradecemos que ha elegido y adquirido la V-TAC. V-TAC le servirá del mejor modo posible. Pedimos que antes de comenzar la instalación lea atentamente las presentes instrucciones y las guarde en un lugar adecuado para consultas próximas.

  • Página 12: Instalación Del Equipo

    SPANISH INSTALACIÓN DEL EQUIPO La instalación se llevará a cabo tan solo con cumplir lo dispuesto en la edición reciente de “Normas de Instalaciones Eléctricas“- EN61547 y los requisitos de BS EN 60598-1. No lleve a cabo la prueba de aislamiento bajo alta tensión puesto que el dispositivo de control pueda ser dañado.

Tabla de contenido