EnviroBoss EB100 Manual Del Propietário

®
The EnviroBoss
water vapor from the air.
WARNING
SAFETY INSTRUCTIONS
WARNING! Do not alter or modify your dehumidifier
in any way. Use only replacement parts authorized
by EnviroBoss Modifications or use of unapproved
parts could create a hazard and will void your
warranty. Contact your authorized distributor for
assistance.
WARNING! Electric shock hazard, rotating fan, hot
surface hazards. Unplug unit before opening cover
for cleaning or servicing. Unit must be grounded.
 Inspect the power cord before use. If cord is
damaged, do not use. Always grasp the plug (not
the cord) to unplug.
 Insert three-prong plug on power cord into a
matching electrically grounded outlet. Do not use
CORRECT PLUG REMOVAL
Grasp IEC plug and pull straight out
IMPORTANT: Damage to IEC receptacle or
dehumidifier resulting from improper removal
of the power cord is not covered by warranty.
The IEC power cord is a wear item and is not
covered by warranty.
07-02332C EB100
Owner's Manual
EB100 Portable Dehumidifier
15180 Josh Wilson Road, Burlington, WA 98233
Phone: 800-932-3030 Fax: 360-757-7950 www.EnviroBoss.com
EB100 dehumidifier reduces humidity in enclosed environments by removing
S A V E T H E S E I N S T R U C T I O N S
adapter. Never cut off third prong. Do not use an
extension cord.
 The unit must be operated on a 115V/60Hz circuit
protected by a Ground Fault Circuit Interrupter
(GFCI) device.
 Keep motor and wiring dry.
 Do not attempt to repair the unit. For Authorized
Service Centers, contact EnviroBoss.
IMPORTANT: CHANGE FILTERS OFTEN
Clogged filters can significantly reduce dehumidifier
performance. Replace filter whenever it appears
heavily loaded with particulate and debris. Filters are
NOT reusable and cannot be cleaned. Do not operate
unit without an EnviroBoss filter properly installed.
Replacement filters: Part no. 08-02063 (pack of 24).
Available from your EnviroBoss distributor.
BEFORE YOU BEGIN
Warranty
If you determine service is required, have your
equipment model, serial number and original proof of
purchase available and call your distributor for
assistance with obtaining a return material authorization
(RMA).
INTRODUCTION
The EB100 Dehumidifier reduces humidity in enclosed
environments by removing water vapor from the air. With
proper use, the EB100 can help maintain humidity at
optimal ranges throughout the growing and processing
stages. Carefully controlling humidity can increase yields
and reduce the risk of mold or powdery mildew that can
reduce profits.
How the EB100 works
The EB100 refrigerant dehumidifier uses a fan to draw
moist air in and condenses it into water that collects in a
tray and is automatically pumped out through a drain
hose. The unit can be set to operate continuously or the
user may select Humidistat Mode. In Humidistat Mode,
the EB100 will turn on and off automatically to maintain
the inlet humidity level the user has selected.
1 EnviroBoss