GE CP650 Instrucciones De Instalación

Installation
Instructions
"If you have questions, call 800.gE.CARES or visit our website at: ge.com"
BEfORE YOU BEgIN
Read these instructions completely
and carefully.
IMPORTANT
•
for local inspector's use.
IMPORTANT
•
codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer – Keep these instructions for
future reference.
• Product failure due to improper installation is not
covered under the Warranty.
WARNINg
properly grounded.
ATTENTION INSTALLER
•
COOKTOPS MUST BE HARD WIRED (DIRECT
WIRED) INTO AN APPROVED JUNCTION BOX. A
"PLUg AND RECEPTACLE" IS NOT PERMITTED
ON THESE PRODUCTS.
• Proper installation is the responsibility
of the installer and product failure due to
improper installation is NOT covered under
warranty.
PARTS INCLUDED
4 Screws
Foam Tape
(WB1X1137)
31-10636-2
(11-10 GE)
— Save these instructions
— Observe all governing
— This appliance must be
— ALL
2 Hold Down
Brackets
36" Electric Cooktop
CP650, JP655, PP962, PP972, PP975, PP980, ZEU36K
MATERIALS YOU WILL NEED
Junction Box
TOOLS YOU WILL NEED
Phillips Head
Screwdriver
Ruler or Straightedge
Safety Glasses
1
Pencil
1/8≤ Drill Bit & Electric or
Wire Nuts
Saber Saw
Hand Drill