Heath Zenith 8485 Instrucciones De Instalación

Dusk-to-Dawn Light
Models
8485 / 8486
Features
• Dusk-to-dawn LED light.
• Automatically operates at night only.
• Wall mount only.
Package Contents
• LED Light (see model above)
• Short Bracket Screws (2x)
• Long Fixture Screws (2x)
• Decorative Nuts (2x)
• Wire Connectors (3x)
• Mounting Bracket (1x)
Requirements
• The light control requires 120-volts AC.
• Some codes require installation by a qualified
electrician.
• This product is intended for use with a junction box
marked for use in wet locations.
© 2016 HeathCo LLC
All manuals and user guides at all-guides.com
Model
8487
PRE-INSTALLATION
For easy installation, select an existing light with a wall
switch for replacement. IMPORTANT: Do NOT use with
dimmers or timers.
For best performance, mount the fixture about 8 ft.
(2.4 m) above the ground.
Wall Mount
Note: Light fixture should be mounted as shown above
when installed (depending upon type of installation).
Model 8485 shown above.
1. Remove mounting bracket from back of light fixture.
2. Ensure the long fixture screws are finger tight against
the mounting bracket.
Long Fixture Screws
Mounting
Bracket
206151-04A