Idiomas disponibles

Idiomas disponibles

ATTENZIONE!! Prima di effettuare l'installazione, leggere attentamente questo manuale. La QUIKO declina ogni responsabilità in caso di non
osservanza delle normative vigenti.
¡ATTENCIÓN!! Antes de efectuar la instalacion, lea attentamente el presente manual. La Empresa QUIKO no asumirà responsabilidad alguna en caso de
inobservancia de las normas vigentes en el pais donde se lleva a cabo la installacion
WARNING!! Before installing, thoroughly read this manual that is an integral part of this Kit. QUIKO declines any responsabilità in the event current standards in
the country of installation are not comlplied with.
ATTENTION!'il vous plaît,attentivement ce manuell'installation. QUIKO décline toute responsabilitécas de non-conformité à cesèglements.
I
MANUALE D'ISTRUZIONE
E
ISTRUCCIONES DE USO
GB
INSTRUCTION MANUAL
F
MODE D'EMPLOI
QK-CE220BASC
V02/2016
Apparecchiatura di comando 1 Motore 230Vac
Cuadro electronico para uno motores 230Vac
Elettronic control panel for one 230Vac motor
Dispositifélectronique de commande 1 moteur 230Vac
Declaration of Conformity
Quiko Italy - Via Seccalegno, 19 Sossano (VI) Italy
declares under is own responsibility that the product
Control board QK-CE220BASC
Complies with the main safety requirements issued by the
following Directives:
--> Radio Sets - 1999/05/EC
--> Low Voltage - 2006/95/EC
--> Electromagnetic Compatibility - 2004/108/EC
and any revisions thereof, and complies with the provisions that implement
said directives in the
National Legislation of the Country of destination where the products are to be used.
Tabla de contenido
loading

Resumen de contenidos para quiko QK-CE220BASC

  • Página 8: Conexiones

    CARACTERÍSTICAS TÉCNICAS T1 T2 Ejemplo De Conexion 230V AC +/- 10% Alimentación 550 W Potencia Motor PROG De Selector Salida alimentación accesorios 24V AC 250mA RADIO Tiempo espera cierre automático 5 a 120 sec POWER POWER 3 a 120 sec Tiempo funcionamiento normal SLOW 2 a 120 sec...
  • Página 9 BASCULANTE La peculiaridad del QK-CE220BASC está en la regulacion de fuerza separada, por los trimmer T1 y T2 (el T1 regula la fuerza durante la carrera en velocidad normal el T2 regula la fuerza en fase de velocidad suave). Trabajando sobre tales aparatos se ON - Basculante puede optimizar el funcionamiento del automatismo de manera tal de regresar en los parámetros de las actuales normas vigentes.

Tabla de contenido