MIYOTA GP01 Manual De Instrucciones

UNIVERSAL MASTERPIECE BORN IN JAPAN
INSTRUCTION MANUAL FOR MIYOTA WATCH MOVEMENT
CALIBER NO. GP01
BATTERY: SR920SW
A) DISPLAYS
B) SETTING THE TIME
C) SETTING THE DATE
D) SETTING THE 2nd TIME (24 Hours)
Hour hand
Second hand
B) SETTING THE TIME
1. Pull the crown out to the 2nd position.
2. Turn the crown to set hour and minute hands.
3. When the crown is pushed back to the normal position, second hand begins to run.
C) SETTING THE DATE
1. Pull the crown out to the 1st position.
2. Turn the crown clockwise to set the date.
*If the date is set between the hours of around 9:00 PM and 2:00 AM, the date may not change on the
following day.
3. After the date has been set, push the crown back to the normal position.
D) SETTING THE 2nd TIME (24 Hours)
1. Pull the crown out to the 1st position.
2. Turn the crown counter-clockwise to set the 2nd time(24H).
3. After the 2nd time(24H) has been set, push the crown back to the normal position.
MIYOTA
MADE IN JAPAN
METAL MOVEMENT
Date
2nd Time
(0 hour to 24 hours)
Minute hand
1st position
2nd position
Normal crown position