Ideal 61 Instrucciones De Instalación

Installation Instructions - WeatherProof Wire Connectors:
Model 61, 62 & 63
• Do not exceed the rating of these connectors
• Turn OFF power before removing or installing connectors
• Wiring must comply with all applicable electrical regulations
• COPPER TO COPPER ONLY. Do not use on aluminium wire
• Incorrect use of these connectors can cause electrical fires, personal injury or death
• Strip wires back to required length - refer to table.
• Straighten wires and align frayed strands.
• Hold wires together with ends even. Lead stranded wires slightly ahead of solid wires.
• Pre-twisting acceptable, but not required. When pre-twisting, strip wires long, hold wires together
with insulation even, twist wire ends together, trim conductors to recommended strip length
• Hold wires firmly, insert wire bundle into connector and twist clockwise until tight
Ratings & Wire Size Combinations for WeatherProof Wire Connector
Model Colour
61 Grey/Orange
62 Grey/Red
63 Grey/Blue
Strip Length Rating
10 mm 24A/450V
16 mm 32A/450V
16 mm 32A/450V
www.idealind.com
1.5 mm
2
IP Rating Min Max
IP55 1 2
IP55 2 6
IP55 n/a n/a
2.5 mm 4.0 mm
2 2
Min Max Min Max
1 2 n/a n/a
1 5 1 4
3 6 2 6
1/5