D-Link 1000Base-T Guia De Inicio Rapido

All manuals and user guides at all-guides.com
1000Base-T to 1000Base-SX/LX
1
Connecting to Power

This Converter is a plug-and-play device.

Connect the supplied AC to DC power adaptor with a
power voltage of 7.5Vdc/1.5Amp to the DC-Jack on the
converter, and then attach the plug into a standard AC outlet.
2
Installing in a Chassis
The Converter can be fit into any of the expansion slots on a special
designed chassis.
Unscrew and pull out the media converter board
 First, install the converter onto a carrier supplied with the chassis:
Step 1- Unscrew and pull out the media converter board.
Step 2- Plug in the media board to any of the vacant slot.
Step 3- Fit the converter onto the carrier and use the screw to secure it.
Quick Install Guide
1
Media Converter