Uline H-2112 Manual De Instrucciones

H-2112
DUMPING HOPPER
CASTER ASSEMBLY
NOTE: Install casters one-at-a-time on each
end of hopper.
Two (2) rigid and two (2) swivel casters are
included.
You MUST determine placement of casters
before installation. Placing the two swivel
casters in the back is recommended.
PAGE 1 OF 6
1-800-295-5510
uline.com
CASTER INSTALLATION
1.
2. Connect and secure safety chain to lift carriage.
3. Adjust chains for minimum slack.
4. Raise forks to chest height, approximately 3' feet.
Figure 1
Pour le français, consulter les pages 5-6.
Drive lift truck forward until hopper's fork pockets
contact vertical legs of lift truck forks. (See Figure 1)
(See FIgure 2 and 3)
Figure 2
Para Español, vea páginas 3-4.
Figure 3
0621 IH-2112