Uline SANITAIRE H-3480 Guía De Solución De Problemas

H-3480
SANITAIRE INDUSTRIAL
®
VACUUM
OPERATING ISSUE
Motor will not start.
Little or no suction.
Vacuum does not clean.
Vacuum is hard to push.
PAGE 1 OF 6
1-800-295-5510
uline.com
TROUBLESHOOTING
1. Turn power switch on.
2. Push plug securely into outlet.
3. Try another outlet.
1. There may be a clog in the bottom of the vacuum or
in the dirt tube.
a. Remove bottom metal plate and check for clogs
in base or brush roll.
b. Unzip cloth bag, remove dust bag and check for
clogs in the dirt tube.
2. Belt may be broken. Replace belt.
1. Dust bag may be full.
2. Replace the dust bag if 2/3 or more full.
3. Adjust carpet height setting to lower position.
4. Check for clogs that restrict the air flow.
5. Check for worn or broken belt and replace if
necessary.
1. Adjust carpet height setting to higher position.
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
RECOMMENDATIONS
0321 TH-3480