BenQ DV3750 Manual Del Usuario

Speaker_E-MX_ES-3750_46.M3504.001.fm Page i Thursday, August 4, 2005 6:16 PM
BenQ DV3750 LCD Display
External Speakers Installation Guide
Package contents
Check the contents in the package. If any item is missing or damaged,
contact your place of purchase immediately.
• External speaker x 2 • Screw x 6
• Speaker cable x 2 • Rubber cover x 2
Installing the speakers
1. Turn off the LCD display. Disconnect the display from the power outlet
and remove all connected audio and video signal cables.
2. Place the display on a flat and stable surface and then put a piece of dry,
soft and clean cloth with appropriate size in front of the display. Slowly
tilt the display forward against the cloth until the display completely lies
down.
All manuals and user guides at all-guides.com
• Installation guide x 1
3. Place the speakers against the left
and right sides of the display, and
then align the top and bottom sides
with the display.
Locate the screw holes as indicated
by the white circles in the illustra-
tion.
4. Use a suitable screwdriver to secure
the speakers with the screws.