IC INTRACOM Intellinet Network Solutions IPS-08GM02-140W Manual Del Usuario página 2

Instructions
This guide presents the basic steps to set up and operate this device.
For the user manual and specifications, visit intellinetnetwork.com. Register your
product at register.intellinet-network.com/r/561167 or scan the QR code on the
cover.
Placement
Prior to use, it is recommended that the switch be placed/positioned:
• on a level surface that can support the weight of the switch
(and any other items that need to be considered);
• with a minimum of 25 mm (approx. 1") of clearance on
the top and sides for adequate ventilation;
• away from sources of electrical noise: radios,
transmitters, broadband amplifiers, etc.;
• where it cannot be affected by excessive moisture.
The switch includes brackets and screws for optional rack mounting.
1 Disconnect any cables from the switch.
2 Position a bracket over the mounting
holes on one side of the switch and
secure it in place with screws.
3 Repeat Step 2 on the other side of the switch.
4 Position the switch in the rack and
screw the brackets to the rack.
5 Reconnect any cables.
2
English
8-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports