Access To The Ap Interface; Network Status (Dashboard) - Mach Power WL-APDB733P48-077 Manual Del Usuario

1.

Access to the AP interface

Set the computer's IP address: 192.168.1.23 (example), subnet mask: 255.255.255.0 The default IP ad-
dress of the AP is 192.168.1.2, the default password is admin.
2.

Network Status (Dashboard)

• WAN: Shows information about the AP's network configuration, WAN and LAN ports IP address,
gateway address, subnet mask and DNS. (Address 169: it is the IP address automatically assigned to
the AP when DHCP is not assigned).
• Wireless info: Shows the 2.4G and 5G wireless information of different countries, the maximum
number of connections, the handover roaming threshold, the power, the bandwidth and the chan-
nel.
• Radio status: Show 2.4G and 5G wireless protocol mode, channel / frequency, wireless speed, noise
and link quality.
• System info: Shows the operating mode, the device model, the firmware version, the execution
time and the MAC address.
• Real Time Flow Chart: Indicates the current upstream and downstream speed of the AP.
• System load: Indicates the use of the CPU and memory, the use of the session
4