Uline H-2890 Instrucciones De Montaje

H-2890, H-2891
SINGLE-SIDED GRID
BIKE RACK
TOOL NEEDED
9/16" Wrench
Leg x 2
1. Insert bolt upward through hole in leg and pole.
Fasten loosely with locknut. Repeat by attaching
other leg to pole. (See Inset A)
2. Insert bolt through hole at the top of the leg and
end of grid. (See Inset B)
NOTE: Grid can only be positioned one way
for mounting. The holes on top are drilled
diagonally through the tube at a slight
downward angle.
PAGE 1 OF 3
1-800-295-5510
uline.com
PARTS
Grid Section x 1
ASSEMBLY
Pole x 1
3. Fasten loosely with locknut. Repeat by attaching
other leg to grid.
4. Align bottom holes of grid with middle hole of legs.
Insert bolt upward and fasten loosely with locknut.
Repeat by attaching other leg to grid. (See Inset C)
5. Complete assembly by tightening all bolts.
Inset B
Inset A
Inset C
Para Español, vea página 2.
Pour le français, consulter la page 3.
Locknut x 6 Bolt x 6
0721 IH-2890