Uline H-4471 Instrucciones De Ensamble

H-4471, H-4472
H-5698, H-5699
HANDLE ASSEMBLY FOR
WALL MOUNT CABINET
HANDLE AND LOCK ROD ASSEMBLY INSTRUCTIONS
1. Insert lock rod assembly (1) through guides on right
door.
2. Insert handle (2) into the door and install lock rod
assembly (1) onto handle shaft.
3. Secure handle with the two Phillips head screws (3).
PAGE 1 OF 3
1-800-295-5510
uline.com
1
4
3
2
Lock Rods Adjustment
4. Check position of the lock rods by rotating the
handle. Lock rods should slide behind top and
bottom flanges of the cabinet. Adjust alignment
of lock rods by moving lock rod center (1) on the
handle shaft to preferred position as shown above.
Secure lock rod assembly (1) with set screw (4).
Para Español, vea página 2.
Pour le français, consulter la page 3.
Assembled View
0421 IH-4471