AVS Ventvisor Deflector Instrucciones De Instalación

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the vent visors are properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
• When using Surface Prep, avoid contact with skin. Use in well ventilated area. If contact is made with
material, flush area with large amounts of water. If irritation persists, get immediate medical
attention. USE PREP ON RUBBER ONLY
Contents - 2 Piece Set
Front Driver
Side Visor
Contents - 4 Piece Set
Front Driver
Side Visor
Tools Required
Preparation Before Painting / Installation
• Please review your warranty card BEFORE installation of this product.
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Instructions
Ventvisor
NOTE: Actual product may vary from illustration.
Front Passen-
ger Side Visor
Rear Driver's
Front Passen- Rear Passen-
ger Side Visor
ger's Visor
Car Wash Supplies
Deflector
®
Alcohol Pad x2
Visor
Alcohol Pad x4
Clean Towel
Page 1 of 3
I - Sheet Number VV88 Rev.A
Scotch Brite Pad Surface Prep
Scotch Brite Pad
Safety Gloves
Pad x1
Surface Prep
Pad x1