LUND Running Boards Instrucciones De Instalación

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the Running Boards are properly anchored to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents
NOTE: Actual product may vary from illustration.
Running Boards (2)
Tools Required
Preparation Before Painting/Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
Installation Steps
1
Installation Instructions
Running Boards
Brackets M8 U-Nuts
2071-11 (8)
Screwdriver
Socket Set
NOTE: Actual application may vary slightly from illustrations.
1
2
M8x30mm
(16) (1-1/5") Bolts
(16)
Starting at the front, find threaded hole in rocker panel and
pinch weld. Attach bracket with bolts. Repeat for second
1
2
Page 1 of 2
I - Sheet Number LUNDRB03 Rev.C
5/16"x3/4" 8.5x18x2
Square Bolts (5/16")
(16) Washers (16)
bracket.
5/16"
Flanged Nuts
(16)