Vollrath KDC1418-4F-06 Instrucciones De Montaje

CAUTION
Sharp Edges and Corners
Handle all parts carefully to prevent personal injury or damage
to the parts. Although edges and corners have been deburred,
they should still be considered sharp.
PARTS LIST
A B
E
Item Description
A Phillips Head Screws
B Self-Locking Nuts
C Handles
D Post and Screws (Included with Front Door Panels)
E Side Panels
F Small Bent Top Panel
G Flat Bottom Panel with Rubber Feet
H Front Door Panels
I Trays
Knock Down Bakery Case – Two Tray
C D
F
G
H
I
Qty
15
3
3
4
2
1
1
2
2
Please register your product at Vollrath.com/ProductRegister
Assembly Instructions
Item No. KDC1418-4F-06
ASSEMBLY
Tools You Will Need
• Medium-size flat head screwdriver.
• Medium-size Phillips head screwdriver.
• A clean cloth to cover the work surface to protect the bakery case.
NOTICE: Do not overtighten screws and hardware.
1. Remove the bakery display case and hardware from packaging.
2. Remove the protective masking from the display case.
3. Lay one side panel flat on a table, with rails facing up, and attach the
bent top and hinged rear panel (door) using three machine screws.
©
2017 The Vollrath Company L.L.C. Part No. 2350239-1 ml 3/28/17