Feiss Herald OL13507 Guia De Inicio Rapido

Installation Instructions for
Herald Outdoor Post
Outdoor
G ENERAL RODUCT NFORMATION P
This product is safety listed for wet locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED lamps may be dimmed with a
additional information.
This instruction shows a typical installation.
1A
Connect the fixture to a suitable ground in accordance to local electrical codes.
1
2 Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
3
Secure the fixture to the post with the post screws making sure to neatly tuck in all wiring.
4
5 Install the candle followers by placing them on top of the candle tubes.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
6
Install the fixture cover onto the fixture using the cover screws.
7
I :
LED dimmer. Consult lamp manufacturer for
LAMP
CANDLE
FOLLOWER
7
CANDLE
TUBE
POST SCREW
POST
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
6
5
COVER SCREW
7
FIXTURE
4
4
3 2
1
OL13507
CAUTION RISK OF FIRE -
FIXTURE COVER
OL13507
1.1