STACK-ON QAS-1845-B Manual De Instrucciones

QAS-1845-B
QAS-1812-B
Serial #:
IMPORTANT
Record the serial number from the tag on the door front.
Keep keys in a secure place away from children.
DO NOT STORE YOUR KEYS INSIDE THE SAFE.
Battery Disposal
Please dispose the used batteries
per municipal or provincial law.
HARDWARE INCLUDED:
(4) M6 x 20 mm (3/4" long) Screws
(4) Washers
TOOLS REQUIRED:
Drill
Flat Head Screwdriver
10 mm Wrench
3/16" (5 mm) drill bit for drilling into wood
®
Instructions
CONTROL FEATURES
1.
Reset button (inside safe)
2.
Indicator light
3.
Fingerprint scanner
4.
Key lock
5.
Battery Compartment (inside safe)
6.
LED Light (inside safe)
GETTING STARTED
When you first receive your safe you will need
to open the door with the key in order to
install the batteries. Batteries are included
and are located inside the safe.
NOTE: This key has also been provided incase
the batteries run low. If you lose your key, you
may purchase a replacement key by referencing
the serial number located on the front of the
door. See section regarding replacement keys
for further information.
To open the safe, insert key into lock and turn
clockwise until the door automatically opens.
NOTE: You must turn the key back to the
locked position before you are able to close
and lock the door.
5
6
1
12
40788-1805