GM 23255735 Instrucciones De Instalación

Rear Fascia Closeout
Kit Contents
Cover Rear Bumper Fascia Trailer
Hitch Accessory Hole
Nut
Bolt
Retainer
Installation Instructions
Tools Required
None
Procedure
Warning:
• Wear Safety glasses in order to avoid eye damage.
• In order to avoid being burned, do not service the vehicle
while the exhaust system is stilnot. Service the vehicle
when the exhaust system is cool.
1. Remove old cover and hardware. Fig.1
2. Install new U-clips and retainer as shown. Fig.2
3. Insert tabs of hitch cover (1) into the slots of rear fascia. Fig.3
4. Rotate inwards and insert the two bolts(2) into top slot (3) of
the rear fascia. Turn the fastener clockwise a quarter turn to lock.
Rear Fascia Closeout Installation
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11 18AU15
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE
WITH GM SPECIFICATIONS.
QTY
REVISION
Initial Release - Jason Tjernlund
1
2
2
2
1
IR 18AU15
AUTH DR
TITLE
2340582
PART NO.
Fig. 1
Fig. 2
Fig. 3
23255735
PART NO.
INSTALLATION INSTRUCTIONS
Rear Fascia Closeout Installation
23255735
1 3
SHEET OF
1 3
SHEET OF