Feiss OL9101 Manual De Instrucciones

Installation Instructions for
Dockyard 1 Light Outdoor Lantern
Wall
G ENERAL RODUCT NFORMATION P
These fixtures are intended to be installed utilizing NEC compliant
junction boxes.
This product is safety listed for wet locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
1A
FIXTURE TOP
SHADE
1 Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
Install the lamp by screwing it into the socket. Refer to the label on the lamp socket for Max Wattage information.
2
Install shade by placing it in the fixture base and secure it to the fixture top with the provided cap screws and nuts.
3
I :
2
3
3
FIXTURE BASE
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
3
3
1
OL9101
OL9101
1.1
CAP NUT
CAP SCREW