Horizontal Convenience Net
Thank you for purchasing the General Motors convenience net for your vehicle. Your package should contain one convenience net
and this instruction sheet. Your net is to help keep small items in place during sharp turns or quick stops and starts. The net is not for
larger or heavier items and is not designed to retain these items during off road use.
Contents
Description
•
Floor Convenience Net
•
Metal Brackets
•
Instruction Sheet
Procedure
•
Locate and remove the carpeted load floor as shown in figure 2.
•
Apply the metal brackets into the rear side of the load floor as shown in figure 3.
•
Reposition the floor carpet back into its original position (metal brackets by the seats side) as shown in figure 4.
•
Attach the forward floor convenience net plastic hooks into the metal brackets straps and the rear plastic hooks into the vehicle D
- Rings as shown in figure 4.
Figure 1
Horizontal Convenience Net
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11
30JN16
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE
WITH GM SPECIFICATIONS.
Quantity
1
2
1
Figure 3
REVISION
Initial Release - Francisco Vergara Ortiz
IR 30JN16
INSTALLATION INSTRUCTIONS
AUTH
DR
TITLE
2509068
23383274
PART NO.
Figure 2
Figure 4
23383274
PART NO.
Horizontal Convenience Net
SHEET
1
3
SHEET
OF
1
3
OF