XPR Access TBS Manual De Instrucciones

TBS
OVERVIEW
Introduction
The TBS-Touch Sensitive Switch is an entirely electronic, non-mechanical and ergonomically designed access control device. It can
either function as an independent manually-controlled push button or alternatively, be connected to a controller to facilitate access
from a secure area. This futuristic device is activated at the lightest of touches and is triggered by the users own static electricity.
With its attractive modern look and die-cast metal body the TBS combines elegance and aesthetics with ruggedness and reliability.
Features
- Feather light touch control
- Works in Pulse and Latch mode
- Ideal for a wide range of applications
- Vandal-resistant
- Resin Potted Electronics
Audio and Visual indications:
- Front dual light indication
- Buzzer sound on every touch
INSTALLATION
Mounting instructions
1. Identify a suitable location on wall or flat surface.
2. Stick the Drilling Template provided on chosen location. Drill 3 holes as indicated in the diagram.
3. Insert 3 nos. of 6 mm wall plugs provided into the drilled holes.
4. Route the cables through the holes provided in the BackPlate.
5. Fix the Backplate firmly on the wall using 3nos. of 4x30mm CSK screws
6. Connect wires.
7. After wiring, place the Housing over the fixed backplate and guide the slot into the backplate tab and slide it downwards.
8. Fix the Housing to the Back-Plate with a M3 x 6 mm Security Screw on the bottom of the Housing using a Security Screwdriver provided.
I
mportant Note: Several layers of protection are provided against transient voltages from static discharge,
lightning and power supply spikes. For protection to be fully effective, earthing should be done correctly.
WIRING AND APPLICATIONS
- Light switches
- Exit button (Access control)
- Elevator buttons
- Industrial panels
EN
FR IT ES DE NL
Touch button switch
Specifications
Input voltage:
Current consumption:
Relay Output:
Indicators-LED:
Panel Connection:
Operating Temperature:
Operating Humidity:
Dimension (mm):
Housing:
Touch Plate:
Protection:
www.xprgroup.com
12-24V DC; 15-24V AC
max.65mA
2A@ 24 DC / 120V AC
Normal - RED
Relay Operation – GREEN
Cable, 0.5 m
-20oC to 50oC
Non-condensing up to 95%
85W x 116.6L x 22.6H
Die-cast Aluminium alloy housing
Mild steel painted
IP66
1