GMC 22912574 Instrucciones De Instalación

Bedliner and Tailgate Liner
Parts Included:
x1
Tools Required:
#15 Torx Driver
#20 Torx Driver
Installation Instructions:
Please read all instructions before proceeding.
It is recommended that 2 people are used to install the bedliner.
Do not allow the bedliner to contact the bedrail surfaces.
Bedliner and Tailgate Liner
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11 05DE13
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE
WITH GM SPECIFICATIONS.
P.N. 22912565
Electric Drill
Tailgate Cover Installation:
P.N. 11612239 (X8)
REVISION
Initial Release - Fabricio Vega
x1 x8
P.N. 11612239
P.N. 12490553
Preparations:
"Clean and dry the cargo truck box prior to installation"
Center punch
1. Remove and discard 8 existing factory installed screws from
tailgate latch plate.
2. Center plastic tailgate cover on truck tailgate. Insert and tighten
tailgate fastener screws provided in hardware kit in the holes of
tailgate.
DO NOT OVER TIGHTEN TO AVOID DAMAGE ON SCREW
THREADS
(Recommended torque = 2.5 N·m)
IR 05DE13
INSTALLATION INSTRUCTIONS
AUTH DR
TITLE
1977021
22912574
PART NO.
x2
P.N. 23149558
22912574
PART NO.
Bedliner and Tailgate Liner
SHEET
x4 x13
P.N. 23438217
1 6
SHEET OF
1 6
OF