iStorage DATASHUR Guia De Inicio Rapido página 4

The datAshur SD may need to be The datAshur SD may need to be
charged before use for 20-30 minutes
by inserting into a powered USB port.
The datAshur SD drive is supplied in the
'Initial Shipment State' with no pre-set
Admin PIN. An 8-64 digit Admin PIN
must be created before the drive can be
used as set out below under 'First Time
Use / Admin PIN setup'.
PIN Requirement:
• PINs must be a minimum length of 8 and
a maximum of 64 digits.
• Cannot contain all sequential numbers
(23456789 or 98765432).
• Cannot contain all repeating numbers
(11111111).
To confi gure an Admin PIN and unlock
the datAshur SD for the fi rst time, please
follow the simple steps in the table below.
First Time Use / Admin PIN setup
1. Insert a genuine iStorage MicroSD card
into the datAshur SD card slot.
4