Auto Ventshade Aerovisor Instrucciones De Instalación

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the vent visor is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents
NOTE: Actual product may vary from illustration.
Contents - 4 Piece Set
Front Driver
Side Visor
Tools Required
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Steps
Clean the painted surface of the window frame with an
alcohol pad, and wipe dry with a soft cloth.
Alcohol
Prep
Pad
Manufactured for Auto Ventshade
Lawrenceville, GA
1
Installation Instructions
Aerovisor
Front Driver Front Passenger
Side Visor
Front Passenger
Side Visor
Car Wash Supplies
NOTE: Actual application may vary slightly from illustrations.
Deflector
®
Side Visor
Rear Driver's
Visor
Rear Passenger's
Visor
Clean Towel
Peel back 2" (5 cm) of tape liner from each end of the visor
2
Page 1 of 2
I - Sheet Number AVR01Rev.B
Alcohol Pad x2
Alcohol Pad x4
flange.