Tait T03-22009-AAAA Manual De Instrucciones

T03-22009-AAAA/ACAA/ADAA
TP9300/TP9400 IS Programming Adapter
English
The T03-22009-AAAA (AEx and Canada), T03-22009-ACAA (INMETRO) and
T03-22009-ADAA (ATEX and IECEx) TP9300/TP9400 IS (Intrinsically Safe) program-
ming adapter allows you to program TP9300/TP9400 IS portable radios using the USB in-
terface of your PC.
The kit contains the following items:
■ IS programming adapter;
■
USB cable that connects to the adapter.
For PC Use
Installing the Driver
Tait Communications recommends that you install the driver by installing the relevant
APCO or DMR programming application before connecting the USB plug to the PC. Con-
necting the USB plug to the PC first will work, but will require you to have internet access
and administration rights to install the driver.
Connect the USB cable to the PC.
Identifying the Serial Port
The PC will assign a serial port number to the connected programming cable.
1 To identify the assigned serial port number, in the Device Manager of your operating
system view the Ports settings. You should find a port named USB Serial Port.
2 In your Tait programming application, select the serial port as described in the Help file.
If the assigned port number exceeds the maximum number that can be set in your Tait pro-
gramming application, you can change the assigned port number.
Under Device Manager / Ports, right-click the Tait Programming Cable and select
Properties. Then in the Port Settings tab select Advanced.
© Tait International Limited 08/2018
www.taitradio.com
402-00096-03