Warn 80860 Instrucciones De Instalación

II. Tools Required
• Wrench: 9/16", 17mm
III. Installation
1. Remove the metal wear bar from the front of
the plow, with the use of a 9/16", or 17mm
wrench.
2. Install the UHMW wear bar, attach with the
supplied hardwear, and torque down to 18 ft-lbs.
Note: UHMW will be black. Lighter color shown for photo only.
UHMW Wear Bar installation is now complete and
should look like figure 2.
Warn Industries Inc.
INSTALLATION INSTRUCTIONS
ATV Plow Wear Bar UHMV 50" 54" 60"
Part Number: 80860, 67861, 67862
Application: ATV Snow Plow
Figure 1.
Figure 2.
I. Parts List
Ref Part # Description
1 * UHMW Wear Bar
2 69807 Nut Lock M10x1.5
3 81707 M10x1.5x40 Carriage Bolt
* Indicates Part Number 80860, 67861, 67862
** Indicates For 60" Plow Only
PAGE 1
Qty
1
7~9**
7~9**
67863 Rev A2