Audibax PR Serie Manual De Instrucciones

5 SPEAKERS CONNECTED IN PARALLEL USING 15W TAPS
NOTE:The total number of speakers multiplied by the tap value cannot exceed the output power(in watts) of the 70V
/100V amplifier. The above example shows 5 total speakers. Using the 15W taps, you will need an amplifier with at
least (5)×(15)=75W. A good rule of thumb is to select an amplifier with 20% greater power; In this case, an amplifier
that delivers about 100W.
UNDERPOWERING VS.OVERPOWERING
2-CHANNEL AMPLIFIER WITH 8 OUTPUT
2 SPEAKERS PER CHANNEL CONNECTED IN PARALLEL
TECHNIAL SPECIFICATIONS
MODEL MODEL
Characteristics PR-41 PR-42
Color Black/White Black/White Black/White
Weight 1.25Kg 1.09Kg
Loudspeaker
2 ways 2 ways
system
Woofer Size 103mm 103mm
Tweeter Size 13mm 13mm
Impedance 8 ohm 8 ohm
3
Observe correct
Polarity for maximum
Bass performance
MODEL MODEL MODEL
PR-52 Characteristics PR-41 PR-42
Power 75 w pair 75 w pair
SPL
1.65Kg 89dB 89dB
Frequenzy 70HZ-20KHZ 70HZ-20KHZ
2 ways
Material ABS ABS
120mm
Grille Material Steel Steel
13mm
100W Line No No
8 ohm
PR Series
MODEL
PR-52
100 w pair
89dB
50HZ-20KHZ
ABS
Steel
No