Uline H-6237 Manual Del Usuario

H-6237, H-6348
π
H-6349
STAINLESS STEEL
PLATFORM TRUCKS
TOOLS NEEDED
1/2" Socket Wrench
9/16" Socket Wrench
1. Attach casters to deck using screws. The platform
truck will come with these screws already inserted
into the underside of the deck. (See Figure 1)
NOTE: Make sure same set of casters go on
each end of the deck. (Rigid vs. Swivel)
Figure 1
PAGE 1 OF 3
1-800-295-5510
uline.com
INSTRUCTIONS
2. Flip the deck over onto its casters. Insert handle into
3. Secure handle using the bolts that come inserted in
Pour le français, consulter la page 3.
handle sockets. (See Figure 2)
the ends of the handle. (See Figure 2)
Figure 2
Para Español, vea página 2.
0721 IH-6237