SCANMASKIN SCAN COMBIFLEX 500I Manual De Instrucciones página 66

F0006 Under voltage
F0007 Speed reference
error
F0016 Protective earth  The cable to the motor has been damaged
failure  The motor has been damaged
 Water have entered the motor
F0018 Internal error
F0021
F0022 Power supply
phase fault
F0034 Motor phase fault  One of the three phases to the motor is missing.
Table 52 Error codes
Alarm codes starts with "A" and fault codes starts with "F". The machine will be operational if an alarm
code is present but not when an fault code is present.
The following table describes the access for the task.
Abbreviation Person
O Machine Operator
E Electrician
S Scanmaskin certified service technician
Table 53 Access rights for different persons
66
This could be due to damage to the motor cable or
to the motor.
 Inspect the motor cable
 Inspect the motor connection
 Contact Scanmaskin Sweden AB
Contact Scanmaskin Sweden AB
 Inspect the motor cable
 Inspect the motor connection
 Contact Scanmaskin Sweden AB
www.scanmaskin.com
See A2003
See A2006
E
E
See A2003
E
E