Work Pro W BlueLine Digital BLC 1 Guía Rápida

BLC 1
QUICK GUIDE/GUÍA RÁPIDA
VERSION 1.1
BLC 1 is a wallmount controller for the BlueLine receivers.
It can control the audio input source.
-
It can control the audio level.
-
It adds an auxiliary input through mini-jack connector.
-
It has remote port to connect a BlueLine receiver.
-
The maximum distance between BLC 1 and the BLR must be 5 m.
-
CONNECTION (version MKII only)
Use a STANDARD Ethernet cable to connect the BLC 1 to the correct input (CONTROL) in the
receiver (BLR2 MKII, BLR2 LITE MKII, BLR2 A PLUS MKII)
If your are using the BLC 1 in an installation with the original BlueLine Digital devices with
white enclosure, please, remember thet the link cable IS NOT STANDARD. Check the following
diagram to see the manufacturing instructions.
IMPORTANT!!!
1