Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

FEATURES
• Up to 3 ON/OFFs per day
• Random ON/OFF Vacation Function
• Dusk to Dawn Function
• Countdown Function
WARNINGS
The electrical system and the method of connecting this timer to the system must be in accordance with local, state,
and national electric codes.
• This unit is to be connected to a 125V, 60Hz power
source only.
• Total Capacity: 15A 1875W Resistive, 1250W Tungsten
(Lighting). 1/2 HP. Do not exceed rated capacity.
• Do not use with any appliance which exceeds the
capacity of the timer.
• Always ensure that the plug of any appliance is fully
inserted into the timer.
• FOR INDOOR USE ONLY.
• Do not attempt to disassemble unit. There are no
serviceable parts inside.
• If you need to clean the timer, remove from the power
source and wipe with a dry cloth. Do not immerse in
water or any liquid.
INSTRUCTIONS
Setting the Current Time
1. Press and hold 'SET CLOCK' for 4 seconds. Hour display flashes.
2. Press + or – to set hour of day. Press 'SET CLOCK' to confirm.
3. Minute display will now flash. Press + or – to select the minute. Press 'SET CLOCK' to confirm
NOTE:
This is a 12-Hour clock display. Make sure to set AM or PM.
Custom Programming
When the 'CUSTOM ON/OFF' button is pressed, the timer enters the Timer Setting Mode, which can provide up to 3 ON/OFF settings per day.
Programming Procedure:
Program #1
1. Press the CUSTOM ON/OFF button. '1 ON' will flash on the LCD.
2. Press the CUSTOM ON/OFF button again. '1 ON' and ON time of day will appear. (By default it will show --:--). Press + or – button to set hour to turn on. Press the CUSTOM
ON/OFF button again. Press + or – button to set the minutes. Make sure to select AM or PM.
3. Press the CUSTOM ON/OFF again. '1 OFF' and OFF time of day will appear. Press + or – button to set hour to turn off. Press the CUSTOM ON/OFF button again. Press + or –
button to set the minutes. Make sure to select AM or PM.
4. Press the CUSTOM ON/OFF again to confirm the first program.
NOTE: If only 1 program is desired, wait 10 seconds and the clock will reappear.
Program #2 and 3
1. Press the CUSTOM ON/OFF button and repeat steps 2 through 4.
NOTE: • If no button is pressed for 10 seconds, program mode will be exited.
• You can accelerate time selection by holding down + or - button.
Vacation Mode
If you are leaving your home or office, and want to give the illusion someone is still there, this timer has a vacation setting. This function allows for a random ON and OFF pattern
during the hours of 6:00PM to 6:00AM
1. In clock mode, press 'VACATION' button to activate the vacation function. A 'V' icon will appear on the LCD screen. Your timer is now set for vacation mode. This is a random
ON/OFF setting.
2. To exit vacation mode, press CUSTOM ON/OFF one time, wait 10 seconds until you see the current time.
NOTE: When in 'VACATION' mode, the LED backlight beneath 'VACACTION' will be on; other settings will be disabled.
Countdown Timer
The countdown function allows you to choose an amount of time for the appliance to be on starting from the time you set it.
1. To set your countdown option, Press 'COUNTDOWN' button. The preset is for 2 hours. You will see an hourglass icon.
2. Press the + or – button to increase or decrease the duration of time for the appliance to remain on. Choose the duration between 1 and 9 hours (full hours only).
3. To start the countdown function, press 'COUNTDOWN'.
NOTE: • To pause the countdown, press "COUNTDOWN".
• To exit countdown mode, press "CUSTOM ON/OFF" and wait 10 seconds until you see the current time.
• Pressing any other function button will automatically stop the countdown and return to the original preset 2 hour countdown setting. When in 'COUNTDOWN' mode, LED
backlight beneath 'COUNTDOWN' will be on, other settings will be disabled.
Dusk-to-Dawn Operation
This timer has a preset dusk to dawn mode that turns on at 6:00PM and off at 6:00AM.
1. Press 'DUSK TO DAWN' button. You will see "ON 6:00PM".
2. Press 'DUSK TO DAWN' button again. You will see "6:00AM".
3. Press 'DUSK TO DAWN' button a third time to activate.
To adjust the Dusk to Dawn time:
1. Press 'DUSK TO DAWN' and adjust the hour setting to turn on.
2. Press 'DUSK TO DAWN' again and adjust the off hour using + or - button.
3. Press 'DUSK TO DAWN' a third time to activate.
Manual Override
To disable any program, press 'OVERRIDE'. The display will read "OFF". To resume press 'OVERRIDE' again.
Reset
1. Use the end of a paperclip and press 'RESET' button to clear all settings back to default settings.
• Large LED buttons
• Manual Override
• 1 Timer controlled grounded outlet
• Unplug when not in use.
• RISK OF ELECTRIC SHOCK:
o Keep children away.
o Unplug timer before cleaning.
o Do not use in wet locations.
• RISK OF FIRE: Do not use to control appliances that
contain heating elements (Cooking appliances, heaters,
irons, etc...)
• PLEASE READ THROUGH THE INSTRUCTIONS PRIOR
TO USE.
WC2021
Daily Digital Timer
Made in China, Hecho en China
999-61450_WC2021_REVA 06/15

Publicidad

loading

Resumen de contenidos para WorkChoice WC2021

  • Página 1 WC2021 Daily Digital Timer FEATURES • Up to 3 ON/OFFs per day • Large LED buttons • Random ON/OFF Vacation Function • Manual Override • Dusk to Dawn Function • 1 Timer controlled grounded outlet • Countdown Function WARNINGS The electrical system and the method of connecting this timer to the system must be in accordance with local, state, and national electric codes.
  • Página 2 WC2021 Temporizador digital diario FUNCIONES • Hasta tres (3) ENCENDIDOS/APAGADOS por día • Botones LED grandes • Función al azar de ENCENDIDO/ APAGADO para vacaciones • Anulación manual • Función del Anochecer al amanecer • Un (1) enchufe conectado a tierra controlado por el temporizador •...