Cauny CAP001 Guia De Inicio Rapido

INSTRUCTION MANUAL FOR CAUNY WATCH
CAP001, CAP002, CAP003, CAP004
Caliber Nº: MI-GM00
Features: analog 3-hands with day of the week and date quartz watch
A) DISPLAY AND BUTTON
B) SETTING THE TIME
1. Pull the crown out to the 2nd position.
2. Turn the crown to set hour and minute hands.
3. When the crown is pushed back to the normal position, second
hand begins to run.
C) SETTING THE DATE
1. Pull the crown out to the 1st position.
2. Turn the crown counter-clockwise to set the date.
* If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change on
the following day.
3. After the date has been set, push the crown back to the normal position.
D) SETTING THE DAY OF THE WEEK
1. Pull the crown out to the 1st position.
2. Turn the crown clockwise to set the day of the week.
* If the date is set between the hours of around 9:00 PM and 1:00 AM, the day of the
week may not change the following day.
3. After the day of the week has been set, push the crown back to the normal position.